1. Use an electronic balance to weigh the resin and curing agent in a ratio of 3:1.
2, the resin and curing and 3-5 minutes.
3. Put the stirred mixture into the extraction bottle to remove the bubbles.
4. Wash and dry the prepared molds and place them horizontally.
5. Pour 1/3 of the mixture of bubbles into the mold and let it rest for 24 hours.
6. Put the insect specimen to be made into the mold after the glue is solidified.
7. Repeat steps 1, 2 and 3 to pour the mixture into the mold, and let it stand for 24 hours if it has not passed half of the insect specimen.
8. After the insect specimen is fixed by glue solidification, repeat steps 1, 2 and 3 to completely immerse the insect in the resin and let stand for 24 hours.
9. Take it out of the mold after the glue has solidified.
10. Polish the edges and corners of the buried specimens with abrasive paper.
11. Polish the buried specimens that have been polished smoothly.
12. The preparation of embedded specimens is completed.
